The 100 ton gantry crane is one of the largest pieces of construction equipment that you will find. They are often used in industries such as mining, steel production, and shipbuilding. This article goes over how these cranes work, what they can be used for, and some safety considerations to keep in mind when using them.
100-Ton Gantry Crane: An Introduction
The first gantry crane was designed and built by James Fenton. This type of crane is the most common type of crane used in construction today. In some cases, a gantry can also be called a bridge crane. This kind of crane is usually designed as double girder gantry cranes. The distinguishing feature of this design is that the horizontal beam from which the lifting equipment hangs at ground level, with the load suspended above it on vertical struts (piles). Gantry cranes are used to lift heavy loads like steel beams and other large pieces of machinery into place for assembly or installation.
Although these cranes are often used for construction purposes, they also have several other common industry applications. For example, they are often used in steel production to move aluminium or steel plates between processing stations. They can also be used in mining and shipbuilding for the same purposes. https://aicranemachine.com/100-ton-gantry-crane/
How Does it Work?
Gantry cranes typically use a conveyor system that slides either one or two rails on which the crane moves. As the crane moves, it can load and unload objects at different points along its length.
These types of cranes are most often used in applications where it is difficult to bring machinery and people closer than 100 feet of each other and there’s not enough space to turn wheels or construct ramps, such as when manufacturing products off-site for installation elsewhere. They’re also frequently found in warehouses where facilities need to move large sections of shelving without having to tear down sections around them. And if you ever wondered why some factories seem like they’re hovering above ground level, it’s because this type of crane was probably built into the factory.
100-ton gantry cranes are typically either rectangular or triangular, with the base being much larger than the other two sides. This is to accommodate all three rails that support it while simultaneously maximizing its stability during use. The crane can be placed on top of this base and then locked in place so that it doesn’t shift while being used.
Since these cranes are designed for heavy loads, they have several different safety mechanisms to prevent accidents from occurring. For example, the rails usually have a mechanism in them which prevents objects from sliding off of them and onto people below once they’ve been loaded onto the crane’s conveyor system.
As mentioned earlier, they are most often used in warehouses where they can be placed near shelving units that need to be moved or restructured frequently. The crane is then positioned over these objects and the people responsible for moving them simply slide their new location along with the conveyor system until it reaches its destination.
Hopefully, understanding how these cranes work will give you a better understanding of how you can efficiently use these pieces of equipment in conjunction with your business. Finally, you can find a powerful producer to help you.